how to change carbide color

Title: How to Change Carbide Color

how to change carbide color

(how to change carbide color)

Carbide is an industrial material that is widely used in various industries, including automotive manufacturing, aerospace, and jewelry making. It is also a popular material for cutting tools due to its high wear resistance and low cost. However, one downside of carbide is that it does not retain its color once it has been formed. This means that you need to periodically sand or grind your carbide tool surface to restore its original color.

Materials Needed:

– Carbide tool (of the appropriate grit)
– Sandpaper (various grits, such as 80, 120, 240, 320, and 400)
– Water

How to Change Carbide Color:

Step 1: Prepare the Tool Surface

The first step is to prepare the carbide tool surface for changing color. Use fine-grit sandpaper to remove any burrs or chips from the surface. You should aim to remove at least 0.5 microns of material from the surface each pass.

Step 2: Apply the New Color

Once the tool surface is properly prepared, apply the new color by using a solution of a developer and water. Developer is typically a type of acrylic-based polish that helps to adhere the new color onto the tool surface. Pour a small amount of developer into a clean cloth and dip it into a container of water. Then, wipe the cloth over the surface of the tool, starting from the edge and working your way towards the center. Be sure to work quickly and avoid splashing developer on the surface.

Step 3: Allow the Color to Set

After applying the developer, allow the color to set on the tool surface. Most carbide solvents take several hours to dry, so be patient while waiting. Once the color has fully set, use the appropriate sandpaper grit to smooth out any rough spots or defects on the surface.

Step 4: Maintenance

To maintain the color of your carbide tool, it’s important to periodically clean and regrind it. Wipe off any remaining moisture from the tool surface and then apply a small amount of carbide cleaner to a soft cloth. Then, wipe off any excess cleaner with another clean cloth. Finally, let the tool dry completely before using it again.


how to change carbide color

(how to change carbide color)

Changing the color of your carbide tool can add a touch of personal style and help you get the most out of your equipment. With the right approach and materials, however, you can easily restore your carbide tool to its original color without damaging the tool itself. By following these steps, you can keep your carbide tool looking great and performing at its best for years to come.

Scroll to Top